SMD Common Mode Chock Coils
TLM Series
| Part Number | Impedance (Ω) at 100MHz | DC Resistance (Ω)MAX | Rated Current (mA)MAX | Rated Voltage Vdc (V)Typical | Insulation Resistance IR (MΩ)MIN. | Withstanding Voltage Vdc (V)Typccal |
|---|---|---|---|---|---|---|
| TLM2012A670□ | 67 | 0.25 | 400 | 50 | 10 | 125 |
| TLM2012A900 □ | 90 | 0.30 | 400 | 50 | 10 | 125 |
| TLM2012A121 □ | 120 | 0.30 | 350 | 50 | 10 | 125 |
| TLM2012A161 □ | 160 | 0.30 | 350 | 50 | 10 | 125 |
| TLM2012A181 □ | 180 | 0.35 | 330 | 50 | 10 | 125 |
| TLM2012A221 □ | 220 | 0.35 | 330 | 50 | 10 | 125 |
| TLM2012A261 □ | 260 | 0.40 | 300 | 50 | 10 | 125 |
| TLM2012A361 □ | 360 | 0.40 | 280 | 50 | 10 | 125 |
Operating temperature: -25 to +85℃
Storage temperature and humidity: -40 to +85℃ , 70%RH max.
If Use Wave soldering is there will degbe some risk. Re-flow soldering temperatures below 240 degrees,there will be unwitting risk.
| Part Number | Impedance (Ω) at 100MHz | DC Resistance (Ω)MAX | Rated Current (mA)MAX | Rated Voltage Vdc (V)Typical | Insulation Resistance IR (MΩ)MIN. | Cut-off Frequency (GHz) | Characteristic Resistance (Ω) |
|---|---|---|---|---|---|---|---|
| TLM2012B900 □ | 90 | 0.30 | 300 | 20 | 10 | 3.5 typ. | 100 typ. |
| TLM2012C240 □ | 24 | 0.20 | 300 | 20 | 10 | 6.0 typ. | 100 typ. |
| TLM2012C300 □ | 30 | 0.20 | 300 | 20 | 10 | 6.0 typ. | 100 typ. |
| TLM2012C600 □ | 60 | 0.30 | 300 | 20 | 10 | 6.0 typ. | 100 typ. |
| TLM2012C900 □ | 90 | 0.30 | 300 | 20 | 10 | 6.0 typ. | 100 typ. |
| TLM2012D120 N | 12 | 0.25 | 420 | 20 | 10 | 1.0 typ. | 100 typ. |
| TLM2012D240 □ | 24 | 0.25 | 420 | 20 | 10 | 7.5 typ. | 100 typ. |
| TLM2012D250 □ | 25 | 0.22 | 420 | 20 | 10 | 7.5 typ. | 100 typ. |
| TLM2012D320 □ | 32 | 0.25 | 400 | 20 | 10 | 7.5 typ. | 100 typ. |
| TLM2012D600 □ | 60 | 0.30 | 300 | 20 | 10 | 7.5 typ. | 100 typ. |
| TLM2012D900 □ | 90 | 0.30 | 300 | 20 | 10 | 7.5 typ. | 100 typ. |
Operating temperature: -25 to +85℃
Storage temperature and humidity: -40 to +85℃ , 70%RH max.
If Use Wave soldering is there will be some risk. Re-flow soldering temperatures below 240 degrees,there will be unwitting risk.